Pole Trailer Specifications:
Base unit specs for PTB81-9K.
Capacity: 10,500 lbs. GVWR, calculated 15% weight transfer, 7,500 lb. load capacity.
Size: Adjustable length 19' / 24' / 29', 8'long x 47" wide x 7" cargo bed (Optional), 94" overall width and 42" bolster height.
Axles: 9,000 lbs. Single Dexter Straight Axle (Optional Axles 10K, 12K, 15K)
Pole Loading: 45" wide front bolster - tubular w/gussets and pole stops, fixed on extendible tongue, 94" wide center bolster - 5" double c-channel construction. 94" wide rear - 5" double c-channel construction, 4 - 21" stanchions - lever lock, sliding and removable, 3 - heavy duty rachet type winch binders with breaker bar, 3 - 15' long x 4" wide x 12,000 lbs. nylon straps.
Tongue: 2-1/2" Lunette eye, 35,000 lbs. capacity, 6 - position adjustable hitch plate, 3/8" x 36 long galvanized safety chains with safety hook and anchor shackle, 6" x 3" x 1/4" wall extendable tongue with lubricated steel wear pads.
A-Frame: 7" x 2" structural c-channel a-frame fixed binkley, 48000 drop leg jack, 10,000 lift / 12,000 static load capacity.
Options: There are many options available for this trailer. Contact us for more info.
Frame: 7" x 2" Structural C-Channel Frame, 7" x 4" Receiver Tube, 7" x 4" Tubular Steel Crossmembers Under Rear Bolster, 3" Structural C-Channel Crossmembers.
Fenders: Fabricated 1/8" Steel Diamond Tread Plate Fender Construction, Reinforced with 3" Structural C-Channel at Front and Rear.
12 Volt: ICC & DOT approved light, sealed beam rubber mounted stop, turn, tail and marker lights. S.O. cable wiring loom, clamped on 16" centers with rubber lined clamps. Connections soldered and sealed with heat shrink tubing. Stretch coil cord with retainer on extendible tongue. 36" pigtail w/6-way aluminum die cast plug, terminated at junction box. 6-way aluminum die cast plug (truck side) in rear butt tube for light bar hook-up. Breakaway kit, sealed lead acid battery with trickle charger.
Paint: Trailer is completely sandblasted, rust prohibitive urethane primer, high solids urethane topcoats, standard colors white and safety yellow, all attachments painted before assembly and installed with serviceable fasteners.
Pole Trailer Specifications:
Base unit specs for PTB111-9K.
Capacity: 10,500 lbs. GVWR, calculated 15% weight transfer, 7,500 lb. load capacity.
Size: Adjustable length 24' / 31' / 38', 11' long x 47" wide x 7" cargo bed (Optional), 94" overall width and 42" bolster height.
Axles: 9,000 lbs. Single Dexter Straight Axle (Optional Axles 10K, 12K, 15K). Oil bath hubs, 8 studs. 12-1/4" x 3-3/8" electric brakes all wheels. 4500 lbs. 6 slipper springs, reinforced spring hangers with 3" structural c-channel crossmenber, 4 ST235/85R16 LR-E tires, 4 6" x 16" wheels, 8 hole on 6-1/2", 1 pair of mud flaps.
Pole Loading: 45" wide front bolster - tubular w/gussets and pole stops, fixed on extendible tongue, 94" wide center bolster - 5" double c-channel construction. 94" wide rear - 5" double c-channel construction, 4 - 21" stanchions - lever lock, sliding and removable, 4 - heavy duty rachet type winch binders with breaker bar, 4 - 15' long x 4" wide x 12,000 lbs. Nylon straps.
Tongue: 2-1/2" Lunette eye, 35,000 lbs. Capacity, 6 - position adjustable hitch plate, 3/8" x 36" long galvanized safety chains with safety hook and anchor shackle, 7" x 3" x 1/4" wall extendable tongue with lubricated steel wear pads.
A-Frame: 7" x 2" structural c-channel a-frame fixed binkley, 48000 drop leg jack, 10,000 lift / 12,000 static load capacity.
Frame: 7" x 2" Structural C-Channel Frame, 8" x 4" Receiver Tube, 7" x 4" Tubular Steel Crossmembers Under Rear Bolster, 3" Structural C-Channel Crossmembers.
Fenders: Fabricated 1/8" Steel Diamond Tread Plate Fender Construction, Reinforced with 3" Structural C-Channel at Front and Rear.
12 Volt: ICC & DOT approved light, sealed beam rubber mounted stop, turn, tail and marker lights. S.O. Cable wiring loom, clamped on 16" centers with rubber lined clamps. Connections soldered and sealed with heat shrink tubing. Stretch coil cord with retainer on extendible tongue. 36" pigtail w/6-way aluminum die cast plug, terminated at junction box. 6-way aluminum die cast plug (truck side) in rear butt tube for light bar hookup Breakaway kit, sealed lead acid battery with trickle charger.
Paint: Trailer is completely sandblasted, rust prohibitive urethane primer, high solids urethane topcoats, standard colors white and safety yellow, all attachments painted before assembly and installed with serviceable fasteners.
Options: There are many options available for this trailer. Contact us for more info.
Pole Trailer Specifications:
Base unit specs for PTB162-10K.
Capacity: 23,500 lbs. GVWR, calculated 15% weight transfer, 19,000 lbs. load capacity.
Size: Adjustable length 30' / 38' / 47', 192" long x 47" wide x 7" cargo bed (Optional), 94" overall width and 42" bolster height.
Axles: 10,000 lbs.HD Tandem Dexter Straight Axle, Oil bath hubs, 8 studs. 12-1/4" x 4" electric brakes all wheels. 5,000 lbs. 5 leaf slipper springs, adjustable spring pads for wheel alignment, reinforced spring hangers with 3" structural c-channel crossmenber, 8 - ST235/85R16 LR-E tires, capacity 2,778 lbs. each. Dual wheel application, 8 - 16" 6" wheels ( 8 hole on 6-1/2"bolt circle), 1 pair of mud flaps.
Pole Loading: 95" wide front bolster - fixed 5" double c-channel construction with 21" Stanchions on tongue. A-Frame Bolster: single Pole Cradle with nylon strap and winch binder. Center Bolster: 95" wide fixed 5" double c-channel construction with 21" stanchions. Rear Bolster: 95" wide fixed 5" double c-channel construction with 21" Stanchions. Stanchions: 6-21" lever lock, sliding and removable. 4 heavy duty ratchet type winch binders with breaker bar. 4 15' long x 4" wide x 12,000 lbs. Nylon straps.
Tongue: 2-1/2" Lunette eye, 35,000 lbs. Capacity, 6 - position adjustable hitch plate, 3/8" x 36" long galvanized safety chains with safety hook and anchor shackle, 8" x 6" x 1/4" wall extendable tongue with lubricated steel wear pads.
A-Frame : 8" structural c-channel a-frame, 2 linked-Binkley, Model 48000 drop leg jack, 12,000 lbs. static load capacity. 1 Binkely, 48000 drop leg jack on a-frame for extending tongue and straping load.
Main Frame: 8" x 4" Tubular frame, 10" x 8" Receiver Tube, 8" x 4" Tubular Steel Crossmembers Under Rear Bolster, 3" Structural C-Channel Crossmembers.
Fenders: Fabricated 1/8" Steel Diamond Tread Plate Fender Construction, Reinforced with 3" Structural C-Channel at Front and Rear of fender.
12 Volt: ICC & DOT approved light, sealed beam rubber mounted stop, turn, tail and marker lights. S.O. Cable wiring loom, clamped on 16" centers with rubber lined clamps. Connections soldered and sealed with heat shrink tubing. Stretch coil cord with retainer on extendible tongue. 32" pigtail w/6-way aluminum die cast plug, terminated at junction box. 6-way aluminum die cast plug (truck side) in rear butt tube for light bar hookup Breakaway kit, sealed lead acid battery with trickle charger.
Paint: Trailer is completely sandblasted, rust prohibitive urethane primer, high solids urethane topcoats, standard colors white and safety yellow, all attachments painted before assembly and installed with serviceable fasteners.
Options: There are many options available for this trailer. Contact us for more info.
If you can't find what you are looking for, contact us because we have more!!
For more info e-mail us at: cathy@hersinc.net or call us at toll free: (888) 232-HERS (4377)