Skid Loaded Trailer Specifications
Base unit specs for SL162-6K.
Capacity: 11,000 lbs. load capacity, Approx. 2,8000 lbs. curb weight, 14,000 lbs. GVWR (calculated 15% tongue weight)..
Size: 16' deck length, 60" tongue length, 102" overall width, 81" deck width between fenders, 16" deck height..
Axles: 6,000 lbs. Tandem Dexter Torflex Axles . 12" x 2" electric brakes all wheels. 8 bolt hubs, 4 - ST245/75R16 LR-E tires, 4 16" x 6" white mod wheel,( 8 hole on 6-1/2"bolt circle), fenders, fabricated from 1/8" steel tread plate.
Loading Ramps: 54"L x 18"W self-supporting / adjustable / removable ramps, vertical slide ramp latch system holds ramps in vertical position, low loading angle - 16" deck height.
Tongue: 2-5/16" ball coupler or 2-1/2" lunette eye (your choice), 6 - position adjustable hitch plate, 3/8" x 36" long galvanized safety chains with safety hook and anchor shackle, 6" x 2" tubular upper tongue, 5" x 2" tubular lower tongue, and a 7,000 lbs. drop leg jack.
Main Frame: 7" x 4" x 3/8" angle frame, 3" channel crossmembers, and stake pockets (5 per side).
Flooring: 2" oak deck - installed with 1/4" floor screws, each board anchored both ends with 5/16" carriage bolts.
12 Volt: ICC & DOT approved light, sealed beam rubber mounted stop, turn, tail and marker lights. S.O. cable wiring loom, clamped on 16" centers with rubber lined clamps. Connections soldered and sealed with heat shrink tubing. Stretch coil cord with retainer on extendible tongue. 32" pigtail w/6-way aluminum die cast plug, terminated at junction box. 6-way aluminum die cast plug (truck side) in rear butt tube for light bar hook-up. Breakaway kit, sealed lead acid battery with trickle charger.
Paint: Trailer is completely sandblasted, rust prohibitive urethane primer, high solids urethane topcoats, standard colors white and safety yellow, all attachment painted before assembly and installed with serviceable fasteners. 2" red/white reflective tape on both side of trailer.
Options: There are many options available for this trailer. Contact us for more info.
If you can't find what you are looking for, contact us because we have more!!
For more info e-mail us at: cathy@hersinc.net or call us at toll free: (888) 232-HERS (4377)
Skid Loaded Tilt Deck Trailer Specifications
Base unit specs for SLT141-7K-E.
Capacity: 6,000 lbs. Load capacity, Approx. 2,2000 lbs. Curb weight, 8,200 lbs. GVWR (calculated 15% tongue weight)..
Size: 14' tilt deck length with 12" entrance ramps, 60" tongue length, 102" overall width, 81" deck width between fenders, 16" deck height..
Axles: 7,000 lbs. Single Dexter Torflex Axles . 12" x 2" electric brakes all wheels. 8 bolt hubs, 4 - ST235/80R16 LR-E tires, 4 16" x 6" white mod wheel,( 8 hole on 6-1/2"bolt circle), fenders fabricated from 1/8" steel tread plate.
Equipment Loading: Tilt deck with low loading angle, spring loaded tilt deck latching system, 12" tapered entrance ramp.
A-FrameTongue and Hitch: 2-5/16" ball coupler or 2-1/2" lunette eye (your choice), 6 - position adjustable hitch plate, 3/8" x 36" long galvanized safety chains with safety hook and anchor shackle, 6" x 2" tubular upper tongue, 5" x 2" tubular lower tongue, and a 7,000 lbs. Drop leg jack, 1-3/16" cold rolled tilt hinge pins.
Main Frame: 7" x 4" x 3/8" angle frame, 3" channel crossmembers, and stake pockets (4 per side).
Flooring: 2" oak deck - installed with 1/4" floor screws, each board anchored both ends with 5/16" carriage bolts.
12 Volt: ICC & DOT approved light, sealed beam rubber mounted stop, turn, tail and marker lights. S.O. Cable wiring loom, clamped on 16" centers with rubber lined clamps. Connections soldered and sealed with heat shrink tubing. Stretch coil cord with retainer on extendible tongue. 32" pigtail w/6-way aluminum die cast plug, terminated at junction box. 6-way aluminum die cast plug (truck side) in rear butt tube for light bar hookup Breakaway kit, sealed lead acid battery with trickle charger.
Paint: Trailer is completely sandblasted, rust prohibitive urethane primer, high solids urethane topcoats, standard colors white and safety yellow, all attachment painted before assembly and installed with serviceable fasteners. 2" red/white reflective tape on both side of trailer.
Options: There are many options available for this trailer. Contact us for more info.